Day-198-Rebuild-Finished

Refurbishment Finished Today (14 March 2025)

Today marks the completion of the refurbishment of the 6″ scale Little Samson traction engine (Excluding Showman’s electrics), all as shown in the photo galleries below.

Image of 02-General-Views-LHS

02-General-Views-LHS

Schedule of Refurbishment Works

Start of Stripdown 28 August 2024
Completion of Refurbishment 14 March 2025
Time for Refurbishment 198 Days (6 1/2 months)

Scope of Refurbishment Works

The engine was completely stripped down (with the exceptions noted below) and every single part was cleaned, repainted or polished.

  • Every part has been cleaned and painted/polished.
  • The Reversing Lever, Quadrant, Reach Rod, Lifting Arm are all painted.
  • All handles are stainless steel.
  • Note the black painted Boiler Clack Valves.
  • All paint is rated for 400F (230C) or over.

Several improvements were made to some components and others were remade to a better standard.

Exceptions to the Stripdown

1) The cylinder itself was not removed from the boiler and the cylinder holding down studs were not removed.

2) The front Axle, Spring and Perch Bracket were not removed from the boiler.

3) Parts that were riveted together were left intact.

4) Tidying-up the Showman’s electrics remains outstanding. The electrics do work (Generator produces electricity to put the canopy lights on and/or charge a car battery) but a bit of neatening up and Volt/Ammeter needed.

As stated above, apart from these items everything else was stripped down completely.

Photo Galleries

Here are photos of the engine mostly taken on the same day of completion, 14 March 2025.

00-Highlights-Gallery

This is a selection of just 6 of the best photos from each of the subject-specific Galleries shown below.

02-General-Views-LHS

Image 1 of 6

01-Main-Gallery

This is a selection of the best photo from each of the subject-specific Galleries as listed below.

01-General-Views-LHS

Image 1 of 24

List of Photos In The Gallery Above

The following photos are shown in the Gallery above.

02-General-Views

03-Cylinder

04-Valve-Gear

05-Crank

06-Backtank

07-Cylinder-Head

08-Cylinder-Chimney

09-Feedpump
10-Manstand-Views

11-Dynamo

12-Gear-Levers

13-Lubricator

14-Reversing-Lever

15-Safety-Valves

16-Trunk-Guide

17-Regulator-Handle
18-Weightshaft-Drop-Arm

19-Drain-Cocks

20-Boiler-Clacks

21-Brakes

22-Steerage

23-Wheels

24-Safety-Wiring

Please Comment Below

Adding a comment helps the search engines to find and promote this website. This is beneficial to all of us because the more ‘members’ there are the more interested and interesting like-minded people there will be for all to interact with.

On this subject…

Please Join The Little Samson Traction Engine Forum

Join the Little Samson  Traction Engine Forum here. Have fun, meet other Little Samson owners/builders, have your say.

Leave a Reply

Your email address will not be published. Required fields are marked *