This Is One Batch Of Tools I Am Importing To My Model Engineering Workshop In Thailand From My U.K. Workshop
The tools were sent to me by my son, Alex, by U.K. Royal Mail (Parcel Force) and as of writing this the parcel has arrived at EMSEVT LAKSI MAIL CENTRE in Bangkok at 0503 this morning.
This is the list of tools I asked Alex to send me. I made this list from memory since I know where I keep everything and what I am missing most in my model engineers workshop here in Pakchong (Pak Chong), Thailand.
Please note this batch is in addition to the tools I already have and another batch of tools I ordered directly from RDG tools in the U.K.
1. Tap& Die Set Metric NormalWhere: Office. “Plastic drawers”” on floor near bookcase.
These will be one size in each drawer. Each draw should have one drill, one die and two taps. They will be marked something like M10, M11 etc.One or two of the draws will have a white Label saying something like M10, M11.The range will be from about M3 to M12. 2. Headband Magnifier Where: Workshop. “Over Lathe” 3. Small Carbide Insert Tool (Key) Where: Workshop. On bench “Cutting Tool Place” Need key for the tiny boring bar. Below, more details of the carbide insert tool. If in doubt send all of them. 4. Knurling Tool Where: Where: Workshop. On bench “Cutting Tool Place” This is home made. A commercially made one looks something like this:- If there are any spare wheels (called knurls) please send those too. 5. Taper Test Bar Where: Workshop. “Cabinet 1 Over” Left hand side. 6. 3 MT Rotating Centre Where: Workshop. “Cabinet 1 Over” Right hand side. In wooden box. 7. 2×2 Gear Cutters (Total 4) Where: Workshop. “Cabinet 1 Over” Right hand side. 8. Small Drilling Vice Where: Workshop. “Cabinet 1 Over” Right hand side (Might be in the workshop near the little lathe) 9. Reamers Where: Workshop. “Plastic Drawers on Bench” In several Drawers. 10. Optical Centre Punch Where: Workshop. “Cabinet 2 Over”. In plastic tube. Where: Workshop. “Cabinet 2 Over”. In plastic tube. 11. Centre Finder Where: Workshop. “Cabinet on Floor”. In wooden box. 12. Wiggler & Centre Finder Set Where: Workshop. “Cabinet on Floor”. In plastic wallet. 13. 61-80 Drills Where: Workshop. Shelves 1. in plastic box. 14. DRILLS SET 1MM – 6MM ( IN .1MM STEPS ) Where: Workshop. Shelves 1. 15. DRILLS SET A-Z Where: Workshop. Shelves 1. 16. Endmills Where: Plastic Drawers (2) on Bench. Bottom two rows. 17. Dial Test Indicator And Holders Where: Cabinet 2 Over. Bottom shelf. Below is the holder for the Dial Test Indicator. 18. ER40 COLLET CHUCK AND FULL 28PC COLLET SET (3-30mm) Where: Could be on the floor near Wooden Cabinet and/or on the top of Cabinet 1 Over. Comprises three components. Two aluminum ‘suitcases’ and one (or two?) chucks. (Chuck(s) not in any box) Above, the aluminum suitcases. I bought another chuck separately. Here is a photo of it:-
|
Leave a Reply
You must be logged in to post a comment.
2 Responses to Importing Tools To Thailand From My Home Workshop In U.K.