Model Engineering In Thailand and South East Asia

Photos Of The Huge ARGO 3VH Milling Machine And The Big Kinwa CH 430X1100 Lathe In The Vendor’s Workshop In Bangkok, Thailand

The photos are large size/resolution so please give time for the photos to load.

These are photos of a huge milling machine and a large lathe that were sent to me by a member of the Announcement List on the ModelEngineeringInThailand.com website in response to my Page “Buying A Large Lathe In Thailand“.

As I explained on that Buying A Large Lathe In Thailand web page I need a large lathe and milling machine to install in my model engineering workshop here in Pakchong (Pak Chong), Thailand, to make a large model of a steam traction engine.

The Announcement List member told me that the machines were about three years old and had seen little use and that he was prepared to sell them to me if I was interested. I was interested and arranged to visit the Vendor’s workshop. These are the photos the Vendor sent me by email.

Photos Of The Huge ARGO 3VH Milling Machine And The Big Kinwa CH 430X1100 Lathe

[flagallery gid=7]
Click on “FS” to see full Size images.

Photos Of  The Big Kinwa CH 430X1100 Lathe

According to the Vendor, John, Kinwa is the last company to make non-CNC lathe machines of quality. Kinwa is a Taiwanese company and john says that these machines are far superior to lathes made in mainland China and that Kinwa is the make of choice for the discerning purchaser.

[flagallery gid=8]

Specification Of  The Big Kinwa CH 430X1100 Lathe

 

KINWA Lathe Machine CH-430 Specifications

Model

CH-430 x 1100

Capacity

  Swing Over Bed

432 mm

  Swing Over Carriage

268 mm

  Swing Over Gap

610 mm

  Width of Gap in front of face plate

150 mm

  Distance Between Centers

1067 mm

  Width of Bed

300 mm

  Stroke of Tool Post

145 mm

  Stroke of Cross Slide

265 mm

Headstock

  Spindle Bore

58 mm ( 78 mm Optional )

  Taper of Spindle Bore & Center

MT6 x MT4

  Spindle Nose

A1-6, D1-6

  Number of Spindle Speeds

12

  Spindle Speed

35,52,75,110,160,230,330,490,650,950,1350,2000 rpm

Threading & Feeds

  Number of Feeds

36

  Range of Longitudinal Feeds

0.037 – 1.04 mm / rev

  Range of Cross Feeds

Half of Longitudinal Feeds

  Leadscrew Diameter

35 mm

  Leadscrew Pitch

P = 6 mm

  Range of Inch Pitches

2 – 72 TPI / 44 Kinds

  Range of Metric Pitches

0.2 – 14 mm / 39 Kinds

Tailstock

  Quill Stroke

170 mm

  Quill Diameter

60 mm

  Quill Taper

MT#4

Motor

  Main Motor

5 HP

  Coolant Pump Motor

1/8 HP

Machine Dimension

  Height

1400mm

  Floor Space

2300 x 1000 mm

  Weight

1800 kgs

Price

Bath

345,000.00

 

Price Above Not Include Vat 7%

 Photos Of The Huge ARGO 3VH Milling Machine

John’s story of this huge milling machine and I was aghast at the size of it when I saw it, is that it is a Taiwanese clone of the well known and well respected American Bridgeport milling machine but that it has been “metricized”.

[flagallery gid=9]

Specification Of The Huge ARGO 3VH Milling Machine

Vertical Turret Milling Machine 3VH

ARGO Vertical Turret Milling Machine 3VH Specifications

Model

3VH

Spindle

Spindle Motor

3 HP

Spindle Speeds ( rpm )

70 – 500 Low / 600 – 4200 High ( Verrival Speed )

Spindle Taper

R-8 or ISO 30

SpindleCenter to Column Face

6 – 3/4″ Min. – 29 – 3/4″ Max. ( 172 mm Min. – 756 mm Max. )

Spindle Nose to Table Top

0″ Min. – 18″ Max. ( 0 mm Min. – 458 mm Max. )

Quill Diameter

3.375″ ( 86 mm )

Quill Feeds ( 3 )

.0015″, .003″, .006″ ( .04 mm, .08mm, .15 mm )

Quill Travel

5″ ( 127 mm )

Head

Head Tilt

45o Forward 45o Backward 90o Right 90o Left

Ram Travel

18″ ( 458 mm )

Ram Swivel

360o

Table

Work Surface

10″ x 50″ ( 254 x 1270 mm )

Max. Workpiece Travel

300 kgs

Longitudinal Travel

35″ T-Slots (3) ( 890 mm )

Supplied with Turcite B

Cross Travel

15.1″ ( 384 mm )

Supplied with Turcite B

Hardness and Ground Way

Vertical Travel

16″ ( 407 mm )

Hardness and Ground Way

Power Feed

X – Axis

155 / cm-kg ( 135 / in-Ib )

Z – Axis Driven Motor

800 mm / Min.

Weight

Approx. Machine Weight

1,250 kgs

Optional

Include

Halogen Lamp

Include

Chip Tray

Price

Baht

245,000.00

Price Above Not Include Vat 7%

Details And Accessories

[flagallery gid=10]

Details Of the SDN35CXA Super Quick Change Tool Post

  • 20,000 P.S.I. Holder locking pressure
  • For manual lathe, prototyping, maintenance work, limited multi operation and toolroom applications
  • Heat treated and precision ground alloy steel body
  • High precision, for internal and external operations, roughing and finishing
  • Interchangeable with industry standard tool posts and tool holders
  • Maintenance free
  • Manufactured in U.S.A.
  • Positive lock with absolute zero backlash
  • Repetitive accuracy of 0.0001″

 Specification Of The 6 Inch Milling Machine Accu-Lock Precision Vice

  • This machine vise without base has a 6 inch jaw width
  • 5-1/2 inch jaw opening
  • 1-3/4 inch jaw height
  • The lock down jaw provides 1/2 pound of force vertically for each pound of horizontal force and it eliminates tilt and hammering
  • The removed hinged handle helps fast locking
  • For Bridgeport milling machine

7 Responses to Photos Of The Big Lathe And Milling Machine I Bought In Thailand

Leave a Reply to admin Cancel reply